De-Burr Technician

Utilize a microscope to remove burrs (fragments or chunks of metal left over from being machined) with tools such as knives, scrapers, files, Dremel tools like ball cutters, reamers, and cratex. Blasting parts with aluminum oxide media (gritty/sandy powder) to either remove burrs or uniformly coat the part. Occasionally injecting molten zinc into a mold to fuse two parts together.

• Verify machined parts meet blueprint specifications or tolerances according to work instructions.
• Operate speed lathes, blasters, dremels or other tools with moving parts, high pressures, or high speeds.
• Use knives, scrapers, or files to remove sharp edges or metal fragments. Also using abrasive media, buffing wheels, cratex or lapping paper to meet surface finishes.
• Use precision measuring tools like gauges, micrometers, calipers, comparators to verify parts are within tolerances per blueprints.
• Closely follow instructions including those on the traveler operation, deburr sheets and guidance from supervisor.
• Occasionally operate injection machine that uses molten zinc.
• Standing while operating a grit blaster to blast parts with media.
• Pressure test parts with oil, air, or nitrogen. Tumble parts in vibrating hones. Wash parts in mechanical washers.
• Use of mold release, rust preventatives, CitraSafe, denatured alcohol, or water with 4Usoap (anti-rusting agent) to protect or clean parts.
• Other duties as assigned.

RAM Aviation, Space & Defense is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. In addition, it is the policy of RAM Aviation, Space & Defense to provide reasonable accommodation to qualified employees who have protected disabilities to the extent required by applicable laws, regulations, and ordinances where a particular employee works.

We welcome former military and law enforcement applicants!

Due to ITAR requirements RAM can only employ US Citizens, Naturalized Citizens and Permanent Resident Alien Card Holders.