Tablet Coating Operator

Responsibilities/Duties:

• Wash coating pan as per SOP 6.6.
• Wash feed pump with purified water then with 70% alcohol. Rinse with purified water.
• Start to turn coating pan and blow hot air 60-70E.
• Load pan with 115-125 kg of core tablets.
• Start the feed pump at rate of 80-100 ml/min. with 60 lbs air pressure.
• Start spraying until weight gain of coated tablets is 3 to 4%, or per instructions.
• Turn off the feed pump. Let machine spray for 5 minutes then turn off air.
• Turn off the heaters. Apply 3-4 gm. of Carnuba wax for polishing. Run another 5 minutes.
• Put new liners in boxes. Scoop out product into boxes then tie liners.
• Put boxes on skid. Weigh skid and record on Filmcoating Sheet.
• Clean equipment and utensils, mixer and pump when starting a new batch or as necessary.
• Keep room clean and orderly, and fill out the Room Cleaning Log.
• Other duties as assigned by the Director of Manufacturing.
• Comply with Current Good Manufacturing Practices, and follow SOPs.
• Other duties, responsibilities and activities may change or be assigned at any time with or without notice.

Job Requirements:

· Attention to detail.

· Bending/ lifting.

· Standing for long periods of time.

· Pushing and pulling.

· Basic math/ writing skills.

Education and Experience:

· High School Diploma or equivalent

· Must be able to lift up to 50 Lbs.

Please apply in person at: 818 Brown street, Salisbury, MD 21804. Ask for Latish.