Optical Surface Tech / Hard Coat / AR / Finishing / Stockroom / Tracer - Full-time / Part-time

• We are hiring on all 3 shifts at our Berea Ohio location. $10 Hr on 1st shift $11 hr on 2nd shift $12 hr on 3rd Shift. If you have machine operation experience you may have an opportunity to start out at a higher pay rate. Interviews will start immediately at our Parma office location. We have about 12 open positions at this time for Temp to hire candidates only apply.

Optical Coating
Operate and monitor vacuum chamber for the deposition of optical coatings on optical surfaces.

Hand or ultrasonically clean and inspect optical components in preparation of depositing optical coatings on optical surfaces. Load optical components on standard, special or improvised fixtures and place them in vacuum chamber. Select, measure and place the applicable chemicals in vacuum chamber. Operate and monitor vacuum chamber for the deposition of "simple" coatings such as Alu-Sio and MgF2.

• Test coatings with a spectrophotometer and laser-photometer equipment. Clean vacuum chamber periodically. Record and file test data. Work to drawings, written or verbal instructions.
• Remove coatings in various acid baths.
• Maintain equipment and work area in neat and orderly condition. Follow prescribed safety rules and regulations.
• Perform other similar and related duties as assigned.
• Position Requirements
• Technical high school diploma or equivalent.
• High school level reading, writing and arithmetic skills.
• Ability to read and work to simple technical drawings, written specifications and verbal instructions.
• Understanding of basic elementary optic theory.
• Aptitude to handle delicate optical components.
• Mechanical aptitude.
• Ability to inspect optical surfaces
• Experience and basic knowledge of vacuum equipment vacuum techniques in general and the deposition of optical coatings specifically, preferred.

Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use of hands or fingers to handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear.

Final Inspector/Optical

Job Title: Q.C. Final Inspector/Optical Department: Inspection

Reports To: Finishing Supervisor

SUMMARY

Inspect final product (frames and lenses) for any visible irregularities.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Primary Duties

• Prioritize work based on start dates while following all standard operating procedures
• Inspect the final product according to Hoya and ANSI Standards.
• Communicate with Supervisor regarding issues and problems.

Secondary Duties

• Cross-train in other positions (i.e. mounting, tinting, polishing, etc.)
• Help in other areas of department when needed

PRODUCTION AND QUALITY GOALS

• Produce 40 jobs per hour with less that 2%Returns/Audit Rejects.

QUALIFICATIONS

Experience

• High School Diploma
• 1-2 years of Finish (Final Inspection/Optical) Experience
• 1 year of Finish (Mounting) Experience in Optical
• 1-2 years of Optical Experience

Knowledge, Skills, and Abilities

• The ability to communication openly with others and work as a team.
• Must be able to work overtime or flexible shifts when needed.
• Must be able to follow all company policies and procedures.
• Must be able to understand and implement work instructions.
• Must be able to understand basic job work tickets.
• The ability to do simple/basic math
• Work without supervision

Job Type: Full-time

 

Surface Techncian

Job Description

Job Title: Surface Tech I Department: Surface

SUMMARY

Maintains surface equipment working, clear errors from equipment, and ensures cleanliness and proper operation of assigned equipment

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Maintains assigned equipment operational
• Clears errors from equipment and restarts equipment
• Ensures equipment has all necessary consumables loaded for operation (alloy, blocks, pads, polish, etc.)
• Ensures equipment is kept clean during the shift
• Takes part of scheduled equipment clean up
• Informs management of equipment malfunction
• Informs management of quality issues
• Informs management of any equipment issues
• Keeps area clean
• Help in other areas when needed
• Helps with light calibration, setup, and maintenance operations.
• Records data accurately from equipment of process as requested by management
• Cross trains on tasks from other areas of the lab
• QUALIFICATIONS
• Education
• High School Diploma or GED
• Experience
• Experience in the Optical Industry as it relates to ophthalmic lenses is desired
• Experience working with Automated equipment, CNCs, or computers
• Knowledge, Skills, and Abilities
• Able and willing to work as a team
• Basic Math
• Must be able to work Overtime, Saturdays and Sundays and some holidays when needed
• Able to read and write English Language well
• Able to memorize large amounts of data accurately
• Computer skills (Windows, MS Office)
• Experience or knowledge working with automated equipment
• Problem solving skills
• Work without constant supervision
• Attendance/Punctuality - Is consistently at work and on time

Able to record information as requested in manual logs or computers While performing the duties of this job, the employee is regularly required to stand, use hands to manipulate. The employee is frequently required reach with hands and arms. The employee is occasionally required to walk, talk or hear. The employee must regularly lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus.

SAFETY REQUIREMENTS

Closed toe shoe required with heel support

• While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts. The work environment may require personal protective equipment.
• Safety glasses and long sleeve shirts may be required where needed.

Job Type: Full-time

General Lab Technician

SUMMARY

Perform entry-level Finish department job responsibilities as defined by superiors.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Primary Duties

• Cross-Train in general Finish positions to assist department as needed.

Secondary Duties

• Cross-train in other positions and help in other areas of department when needed

QUALIFICATIONS

Education

• High School Diploma or GED

Experience

• None required

Knowledge, Skills, and Abilities

• Must be able to read Prescriptions
• Able and willing to work as a team
• Must be able to work Overtime and Saturdays when needed
• Able to read and write English Language well
• Have good eyesight, had/eye coordination, manual dexterity, attention to detail and patience
• Work without supervision
• Attendance/Punctuality – is consistently at work and on time

Physical Requirements

• While performing the duties of this job, the employee is regularly required to use hands to manipulate, handle or feel, reach with hands and arms and use tools provided to complete his/her work. The employee is frequently required to stand and/or sit. The employee is occasionally required walk. The employee must regularly lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, color vision and ability to adjust focus.

Safety Requirements

• Basic understanding of the Injury and Illness Prevention Program and the Hazard Communication Program
• Closed toe shoe required with heel support
• While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The noise level in the work environment is usually moderate
• Must wear safety glasses and gloves or fingercots in most positions