The job below is no longer available.
You might also like
in San Marcos, TX
$19est. per hour SYSCO • 4d agoUrgently hiring 9.5 mi Use left and right arrow keys to navigate- $19
est. per hour SYSCO • 4d agoUrgently hiring 15 mi Use left and right arrow keys to navigate - $23
est. per hour United Rentals • 3h agoUrgently hiring 13.7 mi Use left and right arrow keys to navigate - $18.00 - $23.13
Verified per hour BH Management Services, Inc. • 3h agoGood pay Urgently hiring 13.7 mi Use left and right arrow keys to navigate - $20.00 - $25.00
Verified per hour BH Management Services, Inc. • 3h agoExcellent pay Urgently hiring 13.7 mi Use left and right arrow keys to navigate
Automated Systems Industrial Maintenance I - Full-time / Part-time
•30 days ago
| Hours | Full-time, Part-time |
|---|---|
| Location | San Marcos, TX San Marcos, Texas |
About this job
Job Summary: Maintains H-E-B facilities and systems in a professional manner that assures safety, efficiency and reliability. Supports Facilities Services mission to be a 'World Class' Maintenance Management organization using the latest in technology, processes and procedures.
Essential Functions / Process Responsibilities include the following; other duties may be assigned as necessary:
BUILDINGS AND GROUNDS:
* Perform basic building repairs to dock doors, walls, roof leaks and floor damage
* Troubleshoot, repair and replace plumbing problems with toilet fixtures, water coolers, water supplies and sewer lines
* Install or repair water supply lines using glued plastic, compression fittings, soldered copper tubing or threaded pipe
* Troubleshoot and repair traffic gates, fencing, turnstiles, etc.
* Perform skill level appropriate Preventive Maintenance (PM) tasks on the facility buildings and grounds equipment
* Assist other technicians as assigned to troubleshoot, repair or replace building and grounds equipment or systems
MECHANICAL:
* Use appropriate tools, materials and methods to perform mechanical tasks in a safe and efficient manner
* Repair or replace gaskets, drive belts, bearings, couplings, etc. on support machinery such as air compressors, compactors, pumps, etc.
* Repair conveyors by replacing conveying belts, gear boxes, couplings, drive chains or belts, bearings, shafts, sheaves, sprockets, etc.
* Repair or replace components on automated cranes, elevators, sorters, diverts, palletizes, packaging and shrink wrap machinery
* Perform skill level appropriate PM tasks on facility mechanical equipment
* Assist higher level technicians while installing, troubleshooting and repairing any facility mechanical equipment or systems
HYDRAULICS AND PNEUMATICS:
* Perform pump down, pressure discharge and isolation procedures to make systems safe before performing maintenance activities
* Troubleshoot and replace seals, couplings, check valves, regulators, etc. on small air compressors and hydraulic systems
* Assist higher level technician in troubleshooting and repairing more complex hydraulic or pneumatic system failures then do assigned tasks
* Repair or replace cylinders, directional valves, hoses, actuators and other small system components on powered equipment
* Repair or replace control valves, pressure sensors, switches and other basic control components on operating equipment
* Perform skill level appropriate PM tasks on hydraulic and pneumatic power systems and facility operating equipment
HEATING, AIR CONDITIONING AND VENTILATION:
* Clean evaporator and condenser coils, fans, condensate pan and drains and replace filters on HVAC package units
* Use manifold gauges and thermometer to determine operating conditions, provide data to higher level technician for evaluation
* Assist higher level technician in installing, troubleshooting and repairing HVAC units below 30 tons capacity
* Technician must attain a Universal A/C license or certification to be allowed to access the refrigerant circuit
* Perform any other skill level appropriate PM tasks on the facility HVAC equipment and water chillers
FIRE SUPPRESSION SYSTEMS:
* Secure actuated local wet system to repair water leaks, replace sprinkler heads, switches, etc. and report system status
* Reset local wet system to operating condition
* Assist higher level technician in troubleshooting, repairing and replacing failed components in facility fire suppression equipment
* Perform skill level appropriate PM tasks on a dry fire suppression system
ELECTRICAL/ELECTRONIC:
* Repair or replace lighting fixtures and replace light tubes or bulbs
* Use schematics, diagrams or drawings to locate local source of power supplying an individual unit of electrically driven equipment
* Know location and layout of the facility sub-main power distribution equipment and areas served by each motor control center
* Correctly use basicelectrical test equipment such as a volt meter, amp meter, multimeter and Ohm meter doing basic troubleshooting tasks on AC and DC power with voltages from 12 volts DC to 480 volts AC
* Troubleshoot, repair or replace simple electrical components such as fuses, breakers, switches, small motors, heaters etc
* Troubleshoot, repair or replace I/O devices on simple PLC controlled dock levelers, trailer restraints and other simple equipment
* Assist higher level technician in repairing failures in more complex electrical equipment and systems
* Assist higher level technician when troubleshooting and repairing complex PLC or computer control systems, VFD's etc.
* Perform skill level appropriate PM tasks on electric power, driven and controlled equipment.
WELDING:
* Perform Fire Watch duties for higher level welders and PM welding and metal working equipment
* Prepare equipment and materials for welding by cutting, grinding or heating as needed
* Braze and cut metal equipment using an Oxygen and Acetylene torch
* Make simple repairs to equipment using an electric arc welder or Oxyacetylene torch
* Assist higher level technicians when making more complex repairs or fabrication that requires metal working and welding
* Perform PM tasks on welding equipment
* Follow proper Company standards for Hot Work.
ADMINISTRATIVE:
* Stay informed by attending team meetings, reading bulletin boards and technical bulletins
* Follow Standard Operating Procedures (SOP) related to work order (WO) completion
* Follow Standard Operating Procedures (SOP) related to parts requisitions (Req's) completion
* Complete accident or incident reports per company policy
Preferred Education and Experience
* High School Diploma
* 2-4 years of experience in Mechanical Maintenance, Electrical Maintenance, Welding, Hydraulic/Pneumatic systems, Construction Trades or Air Conditioning Maintenance
Preferred Key Competencies
* Demonstrates the ability to understand day-to-day spoken messages.
* Seeks feedback from others
* Accurately identifies and responds to customer needs in a warm and friendly manner
* Understands, actively supports and follows procedures effectively.
* Applies existing rules and procedures to make decisions and judgments
* Seeks out opportunities for learning and self-development
* Is respectful and honest with Partners, customers and vendors
* Effective written / verbal communication and presentation skills
* Strong organization and time management skills with ability to multi-task and attention to detail
* Demonstrate initiative
Physical and Other Requirements
* Lift 20 lbs or more on an occasional basis
* Standing, stooping, walking, bending and climbing.
* Ability to work in extreme temperatures ranging from -20 to 130 degrees.
* Must be able to lift and carry 75 pounds.
* Must be able to work standing, sitting, stooping, bending, or in a prone position.
* Must be able to work with hands over head.
* Must be able to climb and work from a ladder.
* Must be able to work from elevated work platforms - manlift, scissor lift, catwalk, and silo
Essential Functions / Process Responsibilities include the following; other duties may be assigned as necessary:
BUILDINGS AND GROUNDS:
* Perform basic building repairs to dock doors, walls, roof leaks and floor damage
* Troubleshoot, repair and replace plumbing problems with toilet fixtures, water coolers, water supplies and sewer lines
* Install or repair water supply lines using glued plastic, compression fittings, soldered copper tubing or threaded pipe
* Troubleshoot and repair traffic gates, fencing, turnstiles, etc.
* Perform skill level appropriate Preventive Maintenance (PM) tasks on the facility buildings and grounds equipment
* Assist other technicians as assigned to troubleshoot, repair or replace building and grounds equipment or systems
MECHANICAL:
* Use appropriate tools, materials and methods to perform mechanical tasks in a safe and efficient manner
* Repair or replace gaskets, drive belts, bearings, couplings, etc. on support machinery such as air compressors, compactors, pumps, etc.
* Repair conveyors by replacing conveying belts, gear boxes, couplings, drive chains or belts, bearings, shafts, sheaves, sprockets, etc.
* Repair or replace components on automated cranes, elevators, sorters, diverts, palletizes, packaging and shrink wrap machinery
* Perform skill level appropriate PM tasks on facility mechanical equipment
* Assist higher level technicians while installing, troubleshooting and repairing any facility mechanical equipment or systems
HYDRAULICS AND PNEUMATICS:
* Perform pump down, pressure discharge and isolation procedures to make systems safe before performing maintenance activities
* Troubleshoot and replace seals, couplings, check valves, regulators, etc. on small air compressors and hydraulic systems
* Assist higher level technician in troubleshooting and repairing more complex hydraulic or pneumatic system failures then do assigned tasks
* Repair or replace cylinders, directional valves, hoses, actuators and other small system components on powered equipment
* Repair or replace control valves, pressure sensors, switches and other basic control components on operating equipment
* Perform skill level appropriate PM tasks on hydraulic and pneumatic power systems and facility operating equipment
HEATING, AIR CONDITIONING AND VENTILATION:
* Clean evaporator and condenser coils, fans, condensate pan and drains and replace filters on HVAC package units
* Use manifold gauges and thermometer to determine operating conditions, provide data to higher level technician for evaluation
* Assist higher level technician in installing, troubleshooting and repairing HVAC units below 30 tons capacity
* Technician must attain a Universal A/C license or certification to be allowed to access the refrigerant circuit
* Perform any other skill level appropriate PM tasks on the facility HVAC equipment and water chillers
FIRE SUPPRESSION SYSTEMS:
* Secure actuated local wet system to repair water leaks, replace sprinkler heads, switches, etc. and report system status
* Reset local wet system to operating condition
* Assist higher level technician in troubleshooting, repairing and replacing failed components in facility fire suppression equipment
* Perform skill level appropriate PM tasks on a dry fire suppression system
ELECTRICAL/ELECTRONIC:
* Repair or replace lighting fixtures and replace light tubes or bulbs
* Use schematics, diagrams or drawings to locate local source of power supplying an individual unit of electrically driven equipment
* Know location and layout of the facility sub-main power distribution equipment and areas served by each motor control center
* Correctly use basicelectrical test equipment such as a volt meter, amp meter, multimeter and Ohm meter doing basic troubleshooting tasks on AC and DC power with voltages from 12 volts DC to 480 volts AC
* Troubleshoot, repair or replace simple electrical components such as fuses, breakers, switches, small motors, heaters etc
* Troubleshoot, repair or replace I/O devices on simple PLC controlled dock levelers, trailer restraints and other simple equipment
* Assist higher level technician in repairing failures in more complex electrical equipment and systems
* Assist higher level technician when troubleshooting and repairing complex PLC or computer control systems, VFD's etc.
* Perform skill level appropriate PM tasks on electric power, driven and controlled equipment.
WELDING:
* Perform Fire Watch duties for higher level welders and PM welding and metal working equipment
* Prepare equipment and materials for welding by cutting, grinding or heating as needed
* Braze and cut metal equipment using an Oxygen and Acetylene torch
* Make simple repairs to equipment using an electric arc welder or Oxyacetylene torch
* Assist higher level technicians when making more complex repairs or fabrication that requires metal working and welding
* Perform PM tasks on welding equipment
* Follow proper Company standards for Hot Work.
ADMINISTRATIVE:
* Stay informed by attending team meetings, reading bulletin boards and technical bulletins
* Follow Standard Operating Procedures (SOP) related to work order (WO) completion
* Follow Standard Operating Procedures (SOP) related to parts requisitions (Req's) completion
* Complete accident or incident reports per company policy
Preferred Education and Experience
* High School Diploma
* 2-4 years of experience in Mechanical Maintenance, Electrical Maintenance, Welding, Hydraulic/Pneumatic systems, Construction Trades or Air Conditioning Maintenance
Preferred Key Competencies
* Demonstrates the ability to understand day-to-day spoken messages.
* Seeks feedback from others
* Accurately identifies and responds to customer needs in a warm and friendly manner
* Understands, actively supports and follows procedures effectively.
* Applies existing rules and procedures to make decisions and judgments
* Seeks out opportunities for learning and self-development
* Is respectful and honest with Partners, customers and vendors
* Effective written / verbal communication and presentation skills
* Strong organization and time management skills with ability to multi-task and attention to detail
* Demonstrate initiative
Physical and Other Requirements
* Lift 20 lbs or more on an occasional basis
* Standing, stooping, walking, bending and climbing.
* Ability to work in extreme temperatures ranging from -20 to 130 degrees.
* Must be able to lift and carry 75 pounds.
* Must be able to work standing, sitting, stooping, bending, or in a prone position.
* Must be able to work with hands over head.
* Must be able to climb and work from a ladder.
* Must be able to work from elevated work platforms - manlift, scissor lift, catwalk, and silo
Your Privacy Choices