The job below is no longer available.
You might also like
in Clinton, MO
Boat Production/Manufacturing
•30 days ago
Hours | Full-time |
---|---|
Location | Clinton, MO (Tracker Marine Plant) Clinton, Missouri |
About this job
General:
This position is responsible for the final touch clean up of all boats and the installation of a specific part, furniture, or accessories during the rigging stage of our process.
Tools and Equipment:
A variety of hand tools such as: small grinders, drills, screw drivers, nut drivers, saws, and vacuums. Standard hand tools such as pliers, wrenches, sockets, knives, carpet tools, scrapping tools and squeegees. Protective equipment such as safety glasses with side shields.
Duties:
1. Select the appropriate part as to color and size for the boat the part is being installed into
2. Pre-cut hose or trim to correct length to fit appropriate boat model
3. Drill holes in appropriate location on deck into which screws or bolts will be inserted to secure various accessories and parts
4. Prim pre-cut openings for better fit if necessary
5. Install assigned part and accessories using a variety of securing devices such as: screws, bolts, hold down brackets, and hose clamps
6. Clean boats using various chemicals
7. Apply decals
8. Change vacuum filters as needed
9. Other duties as assigned
FUNCTIONAL FACTORS
Light lifting, under 20 lbs.
Light carrying, under 20 lbs.
Moderate lifting, 21-59 lbs
Moderate carrying, 21 – 59 lbs
Straight pulling
Pushing
Repeated bending
Reaching over shoulders
Use of fingers
Both hand required
Walking
Standing
Kneeling
Repeated stretching
Specific visual requirements
Ability to distinguish basic colors
Ability to distinguish shades of color
Hearing (aid permitted)
ENVIRONMENTAL FACTORS
Outside and inside
Extreme heat
Extreme humidity
Extreme noise, intermittent
Dust
Fumes, smoke or gasses
Solvents (degreasing agents)
Slippery or uneven walking surfaces
Working alone
Working with others
This position is responsible for the final touch clean up of all boats and the installation of a specific part, furniture, or accessories during the rigging stage of our process.
Tools and Equipment:
A variety of hand tools such as: small grinders, drills, screw drivers, nut drivers, saws, and vacuums. Standard hand tools such as pliers, wrenches, sockets, knives, carpet tools, scrapping tools and squeegees. Protective equipment such as safety glasses with side shields.
Duties:
1. Select the appropriate part as to color and size for the boat the part is being installed into
2. Pre-cut hose or trim to correct length to fit appropriate boat model
3. Drill holes in appropriate location on deck into which screws or bolts will be inserted to secure various accessories and parts
4. Prim pre-cut openings for better fit if necessary
5. Install assigned part and accessories using a variety of securing devices such as: screws, bolts, hold down brackets, and hose clamps
6. Clean boats using various chemicals
7. Apply decals
8. Change vacuum filters as needed
9. Other duties as assigned
FUNCTIONAL FACTORS
Light lifting, under 20 lbs.
Light carrying, under 20 lbs.
Moderate lifting, 21-59 lbs
Moderate carrying, 21 – 59 lbs
Straight pulling
Pushing
Repeated bending
Reaching over shoulders
Use of fingers
Both hand required
Walking
Standing
Kneeling
Repeated stretching
Specific visual requirements
Ability to distinguish basic colors
Ability to distinguish shades of color
Hearing (aid permitted)
ENVIRONMENTAL FACTORS
Outside and inside
Extreme heat
Extreme humidity
Extreme noise, intermittent
Dust
Fumes, smoke or gasses
Solvents (degreasing agents)
Slippery or uneven walking surfaces
Working alone
Working with others