The job below is no longer available.
You might also like
in Summerville, SC
- $14
est. per hour Staples • 6h agoUrgently hiring 2.6 mi Use left and right arrow keys to navigate 
$20est. per hour Spectraforce Technologies • 8h agoUrgently hiring 18.8 mi Use left and right arrow keys to navigate- $19
est. per hour Spectraforce Technologies • 8h agoUrgently hiring 18.8 mi Use left and right arrow keys to navigate - $14
est. per hour Alsco • 3d agoUrgently hiring 18.8 mi Use left and right arrow keys to navigate - $18
est. per hour Charleston County Aviation Authority • 14h ago15.9 mi Use left and right arrow keys to navigate
Finisher - Full-time / Part-time
•30 days ago
| Hours | Full-time, Part-time |
|---|---|
| Location | 2531 Hwy 78 West Summerville, South Carolina |
About this job
JOB SUMMARY
Finishing is the part of the production process that is critical to the cosmetic qualities of the boat.The finisher inspects each fiberglass part for defects in gelcoat surface, checks for bubbles, and put a high gloss finish on the transom seam where the deck and the hull are joined together.
Teamwork is a large factor in the success of the department. Quality standards, cost budgets, scheduling, safety and process control are the responsibilities of each member of the team.
The finisher must be able to perform all phases of fiberglass and gelcoat repair on assigned parts with minimal supervision. They should also be able to work on any other fiberglass part in the plant with only general supervision.
Finishing is the part of the production process that is critical to the cosmetic qualities of the boat.The finisher inspects each fiberglass part for defects in gelcoat surface, checks for bubbles, and put a high gloss finish on the transom seam where the deck and the hull are joined together.
Teamwork is a large factor in the success of the department. Quality standards, cost budgets, scheduling, safety and process control are the responsibilities of each member of the team.
The finisher must be able to perform all phases of fiberglass and gelcoat repair on assigned parts with minimal supervision. They should also be able to work on any other fiberglass part in the plant with only general supervision.
Requirements
Job Requirements
Follow the ten steps of the finishing process to ensure adherence to quality standards.
Check the critical areas of the boat to ensure air voids are not present.
Inspect each part carefully for gelcoat and laminate defects and mark with a grease pencil.
Properly mix gelcoats and putties when making repairs.
Make repairs to cracks, chips, air voids, and gouges by filling with proper materials, shape repair to original part shape, prep and spray gelcoat patches, sand patches and buff to high defect-free gloss.
Sand out and buff to high defect-free gloss any gelcoat scratches.
Be responsible for your own work so that it meets department standards for quality and proper procedures.
Keep your tools and equipment maintained and in good working condition.
Responsible for cleanliness of your work area at all times.
Follow Scout's policies and procedures and all safety rules.
Eliminate unsafe conditions to ensure safety of yourself and your team.
Assist in training personnel if required.
Additional Information
To be considered for this job you must include EITHER or BOTH past Job experience and skills. The only time we will consider someone who has excluded this information from their application is if they attach a resume to their application.
Follow the ten steps of the finishing process to ensure adherence to quality standards.
Check the critical areas of the boat to ensure air voids are not present.
Inspect each part carefully for gelcoat and laminate defects and mark with a grease pencil.
Properly mix gelcoats and putties when making repairs.
Make repairs to cracks, chips, air voids, and gouges by filling with proper materials, shape repair to original part shape, prep and spray gelcoat patches, sand patches and buff to high defect-free gloss.
Sand out and buff to high defect-free gloss any gelcoat scratches.
Be responsible for your own work so that it meets department standards for quality and proper procedures.
Keep your tools and equipment maintained and in good working condition.
Responsible for cleanliness of your work area at all times.
Follow Scout's policies and procedures and all safety rules.
Eliminate unsafe conditions to ensure safety of yourself and your team.
Assist in training personnel if required.
Additional Information
To be considered for this job you must include EITHER or BOTH past Job experience and skills. The only time we will consider someone who has excluded this information from their application is if they attach a resume to their application.
Your Privacy Choices